Various Positions (16)

Job description

Adroit Engineering Construction Limited is seeking qualified professionals to fill the role of Various Positions in the Northwestern Province. The ideal candidate should possess at least 3 years of work experience in various roles within a construction environment on a long-term Contract. Urgently before 12;00 hours of 30th May,2025

1. SUPERVISOR -1

1. Read and understand civil and construction drawings.

2. Must have strong leadership skills.

3. Should be qualified in one of trade skills required in civils works  like bricklaying/carpentry/ cement masonry

4. Supervise tasks according to priorities and plans

5. Monitor the attendance of the crew and fill in timesheets

6. Allocate general and daily responsibilities

Requirements

Minimum of grade 12 certificate and relevant trade certificate with 5 years working experience should have a valid drivers License

2. TLB OPERATOR-1

1. Perform daily inspections on the TLB and carry out pre-start inspections on the equipment before use.

2. Ensure TLB is operated safely and efficiently, adhering to all safety procedures and regulations.

3.  Any defects to be reported to supervisor and maintenance team.

4. Adhere to site plans, supervisor instructions and project requirements.

5. Load and unload materials with bucket from trucks and other mobile equipment.

6. Able to excavate using backhole according to drawings and supervisors instructions.

Requirements

Minimum of grade 12 certificate and trained and certified to operate a Tractor, Loader and Backhole with 3 years working experience

3.CARPENTER-3

1. Install walls, floors, ceilings, and roofs

2. Shape or cut materials to specified measurements, using hand tools, machines, or power saws.

3. Take measurements and calculate the size and amount of material needed

4. Lay out floorings, roofings or drywalls ensuring they are leveled and compatible  have excellent understanding of carpentry techniques and methods of installation and construction

5. Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers etc.)

Requirements

Minimum of grade 12 certificate and relevant trade certificate with 3 years working experience

4.PAINTERS/SCAFFOLDERS-   4

1. Assess on-site preparations such as building scaffolding etc

2. Prepare walls and other surfaces for painting by scraping, using sandpaper, removing old paint etc.

3. Fill cracks and holes with appropriate material (e.g. plaster)

4. Mix paint and other materials to prepare the right color or texture

5. Paint surfaces according to instructions with various tools

6. Apply varnish and other finishes.

Requirements

Minimum of grade 12 certificate and relevant trade certificate with 3 years working experience

5. BRICKLAYER & CEMENT MASON -4

1. Read  drawings to calculate materials needed

2. Mix mortar or grout and spread it onto a slab or foundation

3. Lay bricks, blocks, or stones according to plans

4. Ensure that a structure is perfectly vertical and horizontal, using a plumb bob and level

5. Clean and polish surfaces with hand or power tools

6. Clean excess mortar with trowels and other hand tools

7. Fill expansion joints with the appropriate sealing materials

8. Lay out patterns or foundations using a straightedge

9. Break or cut bricks, stones, or blocks to their appropriate size

10. Should be be able to set the forms that hold concrete in place

11. Install reinforcing rebar or mesh wire to strengthen the concrete

12. Signal truck drivers to facilitate the pouring of concrete, Spread, level, and smooth concrete, using a trowel, float, or screed.

13. Mold expansion joints and edges,

14. Monitor curing (hardening) to ensure a durable, smooth, and uniform finish,

15. Apply sealants or waterproofing to protect concrete.

Requirements

Minimum of grade 12 certificate and relevant trade certificate with 3 years working experience

5.STEEL FIXER/BOILER MAKER-2

Should be be able to

1. Read and understand civil and construction drawings.

2. Set out the work area, following engineering plans

3. Use hand and power tools to cut and bend bars or mesh

4. Tie steel reinforcement bars (rebars) to build cages

5. Fit spacers and chairs (supports)

6. Use rebar to build special casts to keep setting concrete in place

7. Fix steel to concrete bases

8. Install beams and pre-cast slabs.

9. Able to use welding/grinding equipment to shape and cut reinforcement to desired shapes according to bending schedules.4. Shape and bends metal sections and pipes using hand and machine tools, and by heating and hammering.

10. Align parts to be joined using hand tools and measuring instrument.

11. Join metal sections using various welding techniques, bolting and riveting.

12. Examine welds for width of bead, penetration and precision.

13. Cleans and smoothes welds by filing, chiselling and grinding.

Requirements

Minimum of grade 12 certificate and relevant trade certificate with 3 years working experience