That cover letter framework saved my life. I had to apply for three jobs in one night, and the structure made it so fast.
Multiple
Surya Biofuels Limited Lusaka, Lusaka, Zambia
Employer and vacancy source: Surya Biofuels Limited
Zambia Job Alerts publishes the vacancy details and application instructions for this listing. Use the employer details, deadline and application section below to verify the opportunity before applying.
- EmployerSurya Biofuels Limited
- LocationLusaka, Lusaka, Zambia
- Employer websitezambiajobalerts.com
- Application methodEmail application
- Listing sourceZambia Job Alerts
Key details for this vacancy
- Employer
- Surya Biofuels Limited
- Location
- Lusaka, Lusaka, Zambia
- Posted
- November 16, 2026
- Job type
- Full Time
- Category
- Other
- Application method
- Email application
Job description
SURYA BIOFUELS LIMITED
JOB ADVERT
VACANT POSITIONS: CRANE OPERATOR (100 tons Crane), CARPENTER, WELDER, PLUMBER, ELECTRICIAN, AUTO-ELECTRICIAN & AUTO MECHANICS.
LOCATION: Crane Operator at Katuba (20Miles) area, Chibombo District of Central Province of Zambia, along Great North Road (Kabwe Road).
LOCATION for CARPENTER, WELDER, PLUMBER, ELECTRICIAN, AUTO ELECTRICIAN & AUTO MECHANICS is, Lusaka and /or PROJECT SITES.
1) CRANE OPERATOR (100 Tons Crane)
Job Purpose
To safely controls heavy lifting machinery to hoist, move, and position heavy materials and equipment at construction, industrial, or mining sites.
Key Responsibilities
- Operate Equipment: Use levers, buttons, and pedals to run mobile, tower, bridge, or overhead cranes.
- Safety & Inspections: Conduct pre-operational daily safety and mechanical checks on fluids, cables, outriggers, and load limits.
- Rigging & Loads: Calculate load weights and work with a banksman or rigger (using hand signals or radio) to safely attach and move materials.
- Maintenance: Perform routine maintenance like lubrication, cleaning, and reporting mechanical defects to supervisors.
- Record Keeping: Maintain daily logs of transported materials, lift plans, and equipment maintenance history.
Requirements & Qualifications
- Training & Certification: Completion of secondary school or equivalent, combined with vocational training, an apprenticeship, or operator certification (such as TEVETA certified).
- Physical & Mental Skills: Good depth perception, hand-eye coordination, physical stamina, and the ability to work at heights or in varied weather conditions.
- Licenses: A valid Commercial Driver’s License (CDL) and/or heavy machine plant operating license is required depending on the type of mobile or transport crane.
2. CARPENTER
Job Purpose
To construct, install, and repair wooden and structural frameworks, concrete formwork, roof trusses, doors, windows, and interior/exterior finishes according to engineering blueprints and safety standards.
Key Responsibilities
- Read and interpret architectural drawings, structural blueprints, and site sketches.
- Measure, cut, shape, and assemble timber, plywood, and composite materials using hand and power tools.
- Build and erect concrete formwork, centering, and scaffolding for slabs, beams, and columns.
- Install doorframes, windows, roof framing, floorboards, ceilings, and built-in fixtures or cabinetry.
- Inspect existing structures, diagnose structural wear or termite/water damage, and carry out repairs.
- Maintain a clean, organized, and hazard-free workspace in line with Zambian site safety protocols.
- Supervise and guide junior carpenters or site helpers on daily tasks.
Qualifications & Requirements
- Education: Grade 12 School Certificate plus a Craft Certificate in Carpentry and Joinery from a recognized institution (e.g., TEVETA Zambia).
- Experience: Minimum 2–5 years of hands-on experience in residential or commercial construction.
- Skills: Proficiency with hand and power saws, planers, drills, and leveling tools. Strong physical stamina and ability to work at heights.
3. WELDER
Job Purpose
To fabricate, join, cut, and repair metal structures, reinforcing steel elements, pipes, gates, roof trusses, and heavy site equipment using arc, MIG, or TIG welding techniques.
Key Responsibilities
- Interpret structural drawings, weld symbols, and engineering specifications.
- Select appropriate welding processes (Electric Arc / Stick, MIG, or Oxy-acetylene cutting) based on material thickness and design.
- Prepare metal surfaces by grinding, cleaning, beveling, and clamping components to precise tolerances.
- Perform structural welding in various positions (flat, vertical, horizontal, and overhead).
- Inspect and test completed welds for structural integrity, cracks, or distortion using visual or non-destructive checks.
- Repair damaged site machinery, dump truck bodies, steel fences, and structural metal beams.
- Ensure strict adherence to hot-work permits, fire safety, and personal protective equipment (PPE) guidelines.
Qualifications & Requirements
- Education: Grade 12 Certificate plus a TEVETA-accredited Craft Certificate or trade test certification in Metal Fabrication and Welding.
- Experience: Minimum 3 years of experience as a structural or pipeline welder in the construction or mining sector.
- Skills: Strong knowledge of metal metallurgy, electrode selection, safe operation of angle grinders and cutting torches.
4. PLUMBER
Job Purpose
To install, maintain, test, and repair water supply, drainage, sewage, and sanitary plumbing systems in commercial or residential construction projects in compliance with local municipal codes (e.g., Lusaka Water Supply and Sewerage Company or local council standards).
Key Responsibilities
- Study architectural and plumbing schematics to plan pipe routing and fixture placements.
- Assemble, join, and install pipe networks made of PVC, PPR, galvanised steel, or copper using solvent cement, threading, soldering, or fusion welding.
- Install sanitary appliances, water heaters, pumps, storage tanks, valves, and drainage manholes.
- Conduct pressure and leakage tests on newly installed pipelines using water or air gauges.
- Coordinate pipe rough-ins around structural concrete, rebar, and electrical conduits to avoid clashes.
- Troubleshoot and repair blockages, burst pipes, and leaking fittings on active sites.
Qualifications & Requirements
- Education: Grade 12 Certificate plus a Craft/Technician Certificate in Plumbing and Sheet Metalwork (TEVETA certified).
- Experience: Minimum 2–4 years working on building construction sites.
- Skills: Proficiency with pipe-threading machines, pressure testing equipment, and blueprint reading.
5. ELECTRICIAN
Job Purpose
To install, test, and maintain electrical wiring, distribution boards, lighting circuits, earthing systems, and power supply networks in accordance with local electrical regulations and safety standards.
Key Responsibilities
- Read and interpret electrical schematics, single-line diagrams, and architectural layouts.
- Chisel walls, run PVC/GI conduits, pull cables, and mount switchboards, circuit breakers (MCBs/RCCBs), and lighting fixtures.
- Terminate low-voltage power cables, control panels, backup generator tie-ins, and solar/inverter systems.
- Perform insulation resistance, continuity, and earth-fault loop impedance testing to commission circuits safely.
- Diagnose electrical faults, short circuits, and power outages during construction phases.
- Ensure compliance with the Energy Regulation Board (ERB) and local municipal safety codes.
Qualifications & Requirements
- Education: Grade 12 Certificate and a Craft/Technician Certificate in Electrical Engineering or Electrical Installation (TEVETA / Energy Regulation Board certified wireman/artisan status is an added advantage).
- Experience: Minimum 3 years of electrical installation experience on building sites.
- Skills: Familiarity with multimeters, clamp meters, insulation testers, and strict adherence to electrical safety lockout/tagout procedures.
6. AUTO ELECTRICIAN
Job Purpose
The ideal candidate will diagnose, service, repair, and maintain the electrical of our light vehicles, trucks, or heavy-duty machinery to ensure optimal safety, performance, and minimal downtime.
Key Responsibilities
- Diagnose & Troubleshoot: Use computerized diagnostic scanners, multimeters, and test lights to identify electrical and electronic faults.
- System Repairs: Repair or replace faulty alternators, starter motors, wiring harnesses, ignition systems, fuses, relays, switches, and battery units.
- Electrical Installations: Install vehicle accessories such as alarms, tracking devices, auxiliary lighting, radios, and air-conditioning units.
- Circuit Diagrams: Read and interpret complex automotive electrical schematics and wiring diagrams.
7. AUTO MECHANIC
Job Purpose
The ideal candidate will diagnose, service, repair, and maintain the mechanical systems of our light vehicles, trucks, or heavy-duty machinery to ensure optimal safety, performance, and minimal downtime.
Key Responsibilities
- Engine & Mechanical Service: Perform routine preventative maintenance (oil changes, filter replacements, brake overhauls, belt checks, and suspension service).
- Major & Minor Overhauls: Disassemble, inspect, repair, or replace engine components, transmission parts, cooling systems, steering, and fuel delivery systems.
- Road Testing: Conduct post-repair safety and roadworthiness test drives to verify that all mechanical and electrical issues are resolved.
- Workshop Safety & Compliance: Adhere strictly to occupational health and safety (OH&S) standards, maintain a clean workspace, and handle waste/batteries responsibly.
- Record Keeping: Log all repairs, spare parts used, and service schedules into the workshop or computerized maintenance management system (CMMS).
Qualifications and Requirements
- Education:
- Grade 12 School Certificate.
- Craft Certificate, Advanced Certificate, or Diploma in Automotive Engineering, Auto Electrical, or Motor Vehicle Mechanics from a recognized institution (e.g., TEVETA-accredited institution in Zambia).
- Experience:
- Minimum of 2 years of hands-on working experience as a combined Auto Electrician and Auto Mechanic in a reputable garage, transport firm, or mining/construction environment.
- Licenses & Certifications:
- Valid Zambian Driver’s License (Class C or an added advantage).
- Valid relevant trade test certificates.
- Key Skills & Competencies:
- Strong knowledge of modern fuel injection, ABS, electronic controls, and standard mechanical assemblies.
- Ability to use diagnostic tools and interpret electrical wiring diagrams.
- Good communication skills in English (written and verbal).
- Integrity, physical fitness, and the ability to work under pressure with minimal supervision.
HOW TO APPLY
Applicants who meet the above qualifications and experience are invited to submit an application letter and Curriculum Vitae, together with ZAQA-verified copies of their academic and professional qualifications. Applications should be submitted, no later than 30th November 2026, via to careers@suryabiofuels.com or physically drop them to;
The Human Resource Manager
Surya Biofuels Limited
Head-office: Stand No. 109-110, Chishango Road, Villa Elizabetha
LUSAKA
Kindly note that only shortlisted candidates will be contacted.
Apply stronger for this role
Tailor your CV and cover letter to this vacancy so your relevant experience is easier for the employer to see.
Apply for this job
To apply for this job email your details to careers@suryabiofuels.com
